KISS ESC 2-6S 30A

KISS ESC 2-6S 30A

$30.99
0.00 (0 votes)
SKU : PR1994
Brand : Flyduino
15 In Stock

High performance through optimal coordination of hardware and software.

You'll find no ESC of a comparable size that switches as quickly and precisely, remains as cool and actively controls the rotor as well, with comparable power and feature set.

Unique safety features provide extra protection to prevent damage if incorrectly configured.
KISS - Keep it super simple , that's the approach, unnecessary complexity is omitted, every part is implemented optimally.
The ESC was developed to ensure wide compatibility with almost all motors on the market, settings are adapted automatically in the firmware, no need to worry, solder, go out and fly.

Technical details:

- Operating voltage 6 - 26V
- Maximum continuous current 30A*
- Instantaneous maximum current (max. 10 seconds) 45A**
- 370,000 ERPM maximum field speed (Max 350,000 recommended)

* At moving ambient air
** Limited by over-current protection

KISS ESC Features

Automatic one-shot detection:

At the signal connector (4), the KISS 30A automatically recognizes which transmission protocol is used.

Over-voltage protection and over-current protection:

If the voltage rises across 26V while regenerative braking, the KISS ESC regulates the braking power of the motor dynamically.

At 45A load the over-current protection responds and reduces further throttle response protecting the motor and electronics.

Fallback System:

The 2nd PWM input can be connected to a second flight controllers as a fallback backup. The fallback system can not process a one shot signal if used.
If the fallback pin (5) is connected, the LED (6) has no function. The fallback system intervenes only when no PWM signal is present on (4).

Signal amplification:

The KISS 30A ESC has a signal amplifier for 3.3V signals. The threshold voltage is 1.7V.

Especially at higher currents the signal amplifier ensures a clean signal.

Special features:

- Designed for Quadcopters, Multicopters and 4D Planes
- Very small size (21 x 35.5 x 5.2 mm)
- Very light weight (5.4grams)
- Fine speed control (about 950 steps)
- No external capacitor (electrolytic capacitor) required*
- Rapid implementation of throttle changes
- Linear throttle response
- Active freewheeling (small diode losses -> higher efficiency)
- Regenerative braking -> provides rapid throttle response on deceleration
- Fast FET switching by using real gate drivers
- Minimal dead times through adaptive dead time
- 2 - 6S LiPo Battery power capable
- Automatic detection of the One Shot Signal
- Second Signal Input for Fallback System
- PWM signal amplifier
- unique Over-voltage protection
- unique Over-current protection

This Device is ESD sensitve, take proper precautions, this is no "your coffee is hot warning", its physics we cant avoid, the smaller electronics become, the more ESD sensitive they are.

Please read our article on Electrostatic Discharge before soldering your ESC's.

Dimension (L x W x H) 2 x 1 x 0.25 Inch
Weight< 0.07 Pound

Rating

Overall
Quality
Fit & Sizing

Users' reviews

Log-in to add review